Installing a NetWare Server Driver
3-13
Installation Instructions
This section has instructions for installing TLNKPODI in
two ways:
■
On a file server in an existing NetWare environment
running NetWare 3.12 or 4.1x. These instructions also
apply to a new installation or upgrade to NetWare 3.12.
■
As part of a new NetWare 4.1x installation or an
upgrade to NetWare 4.1x.
Instructions in this section are written for
TokenDisk
diskettes. If you are using the
TokenDisk
CD, substitute
the appropriate path where required.
Installing the Driver in an Existing
NetWare Environment
This section explains how to install TLNKPODI on a file server
already running NetWare 3.12 or 4.1x. The instructions in this
section should also be used for a new NetWare 3.12
installation or an upgrade to NetWare 3.12.
If you are in the process of upgrading to NetWare 4.1x,
proceed to “Installing the Driver as Part of a New Server
Installation or Upgrade to NetWare 4.1x.”
TokenDisk
diskette #1 contains the server driver and versions
of Novell NetWare Loadable Modules (NLMs) required for all
NetWare 4.1x-compliant server drivers. You must use these
NLMs, or more recent versions, with TLNKPODI.
Table 3-1 shows the names, locations, and versions of the
support modules.
Table 3-1
Location of NetWare Support Modules
NetWare
Version
Directory
4.1x
\NETWARE\NWSERVER\4.1x\MSM.NLM
\NETWARE\NWSERVER\4.1x\NBI.NLM
\NETWARE\NWSERVER\4.1x\TLNKPODI.INF
\NETWARE\NWSERVER\4.1x\TLNKPODI.LAN
\NETWARE\NWSERVER\4.1x\TLNKPODI.LDI
\NETWARE\NWSERVER\4.1x\TOKENTSM.NLM
3.12
\NETWARE\NWSERVER\3.12\MSM31X.NLM
\NETWARE\NWSERVER\3.12\NBI31X.NLM
\NETWARE\NWSERVER\3.12\TLNKPODI.LAN
\NETWARE\NWSERVER\3.12\TOKENTSM.NLM
Book Page 13 Saturday, November 1, 1997 3:13 PM