3-12
C
HAPTER
3: N
OVELL
N
ET
W
ARE
E
NVIRONMENTS
Your NET.CFG file should look similar to the following:
LINK DRIVER TLNKPODI
Node Address 00608C112233
Frame Token-Ring MSB
Frame Token-Ring_SNAP MSB
The node address should be set to the UAA or the LAA.
Modify and save the NET.CFG file if the node address and
frame type are not correct.
3 Remove the
OS/2 Requester
diskette and restart
the PC.
This completes the procedure for installing the OS/2 client
driver for NetWare.
Installing a NetWare Server Driver
This section contains information about installing the
TLNKPODI.LAN NetWare server driver for the 3C359 NIC
in the following environments:
■
NetWare 3.12
■
NetWare 4.1x
The driver and associated files are located in the
\NETWARE\NWSERVER directory on
TokenDisk
diskette #1.
Driver Support
The TLNKPODI server driver is a high-performance
NetWare 4.1x-compliant server driver. It can be used in
the following environments:
■
NetWare 4.1x servers
■
NetWare 3.12 servers
■
NetWare servers running SFT III in NetWare 4.1 (as an
IPX link, not as a mirrored server link)
The term “NetWare 4.1x-compliant” server driver in this file
means that the HSM (hardware-specific module, or server
driver) meets the Open Data-Link Interface (ODI) 3.3
specification. Netware 3.12 servers using ODI 3.3 drivers
need updated files from Novell. If you are installing the
driver in a NetWare 3.12 server, download the LANDR9
and 312PTA.EXE files from Novell’s Web site.
Book Page 12 Saturday, November 1, 1997 3:13 PM
