3-6
C
HAPTER
3: N
OVELL
N
ET
W
ARE
E
NVIRONMENTS
Installing DOS Client32
This section describes installing the TLNKPODI.LAN DOS
Client32 driver for a NetWare Client32 environment. For
the driver installation procedure, you need the Novell
Client32 diskettes and either the
TokenDisk
CD or
TokenDisk
diskette #1.
1 Insert the Novell Client32 setup diskette #1 into a drive,
switch to that drive, and enter the Install command. For
example, if the diskette is in drive A, enter:
a:\install
2 Read the Novell information window and press Enter.
The displayed window lists installation options.
3 Use the arrow keys to move to the options you need.
Press the spacebar to select the option.
The system prompts you for configuration information.
4 Confirm the configuration and press Enter.
5 If your configuration requires TCP/IP, supply the
IP Address, Router, Subnetmask, DNS Domain, and
Domain Name Server Address. Press Enter.
6 When prompted for the LAN Driver type, select 32-bit
and press Enter.
The 32-bit Network Board Drivers window is displayed.
7 When prompted to select the driver, scroll to
User
specified 32-bit driver
.
8 Insert
TokenDisk
diskette #1 in the drive or the
TokenDisk
CD in the CD-ROM drive. Enter the
following path:
<drive>:\netware\client32
9 Select
TokenLink Velocity XL PCI
and press Enter.
The system allows you to change the configuration.
10 To change a parameter, select it and press Enter. Type
the new value. When you are finished changing
parameters, press Enter.
Book Page 6 Saturday, November 1, 1997 3:13 PM
