OfficeConnect Remote 812 Boot Mode Options
1-3
OfficeConnect Remote 812 Boot Mode Options
To simplify the installation process, the Remote 812 can be
initialized with pre-configured parameters using the DIP
switches located on the back of the unit. There are three
Boot Mode options:
DHCP Smart Mode
Default Bridge Mode
Unconfigured Mode
It is important to note that these boot modes only take
effect if the unit has not been previously configured. To
erase the existing configuration, reference Appendix A.
The DIP switch settings and the corresponding Boot Mode
option are as follows:
Table 1-1
DIP Switch Settings
Option One: DHCP Smart Mode
You can use the DHCP Smart Mode if:
You plan on using private addresses on the LAN (i.e.
your Service Provider has provided you with only 1
public IP address),
You plan on using the Remote 812’s DHCP Server
The Remote 812 will power up with the following “DHCP
Smart Mode” configuration:
LAN IP address = 192.168.200.254, Netmask
255.255.255.0.
DHCP IP address pool (40 addresses): 192.168.200.1-40
DNS name: ocrdsl-3com.com.
1
2
3
4
Mode
off
on
off
off
DHCP Smart Mode
off
off
on
off
Default Bridge Mode,
VPI=0, VCI=35
off
off
off
on
Default Bridge Mode,
VPI=8, VCI=35
off
off
off
off
Unconfigured Mode
