3Com MSR 50 Series, Configuration Manual

Page: 412 / 2443

412 C
HAPTER
21: B
RIDGING
C
ONFIGURATION
Follow these steps to bridge routing:
Displaying and
Maintaining Bridging
Configurations
Transparent Bridging
Configuration
Examples
Transparent Bridging
over ATM
Network requirements
As shown in Figure 112 , LAN 1 and LAN 2 are attached to Router A and Router B
respectively, which are interconnected through their respective ATM interfaces.
Configure the two routers to enable transparent bridging between the two LAN
segments.
To do... Use the command... Remarks
Enter system view system-view -
Enable bridge routing bridge routing-enable Required
Disabled by default
Create a bridge-template
interface and enter
bridge-template interface
view interface bridge-template
bridge-set
Required
No bridge-template interface
configured by default
Configure a MAC address for
the bridge-template interface mac-address mac-address Optional
Return to system view quit -
Configure routing or bridging
of the specified network layer
protocol(s) on bridge set bridge bridge-set routing
{ ip | ipx }
Optional
By default, routing if network
layer protocols is disabled
bridge bridge-set bridging
{ ip | ipx | others }
To do... Use the command... Remarks
View bridge set information display bridge information
[ bridge-set bridge-set ]
Available in any
view
View the statistics information
of a virtual bridge-template
interface display interface bridge-template
[ interface-number ]
Available in any
view
View bridge table information display bridge address-table
[ bridge-set bridge-set | dlsw |
interface interface-type
interface-number | mac mac-address ]
[ dynamic | static ]
Available in any
view
View the statistics information
of bridged traffic display bridge traffic [ bridge-set
bridge-set | dlsw | interface
interface-type interface-number ]
Available in any
view
Clear bridge table entries reset bridge address-table
[ bridge-set bridge-set | dlsw |
interface interface-type
interface-number ]
Available in user
view
Clear the statistics
information of bridged traffic reset bridge traffic [ bridge-set
bridge-set | dlsw | interface
interface-type interface-number ]
Available in user
view