3Com MSR 50 Series, Configuration Manual

Page: 2091 / 2443

Configuration Example for SNMP Logging 2091
# Configure the system information of the router.
[Sysname] snmp-agent sys-info version all
[Sysname] snmp-agent sys-info contact ;Mr.Wang-Tel:3306
[Sysname] snmp-agent sys-info location telephone-closet,3rd-floor
# Configure the IP address for the port Ethernet 1/0 to be 1.1.1.1/24.
[Sysname] interface ethernet 1/0
[Sysname-ethernet1/0] ip address 1.1.1.1 24
# Configure the IP address of the port Ethernet 1/0 to be the source address of
Trap messages.
[Sysname] snmp-agent trap source ethernet 1/0
# Enable sending of Trap messages to the NMS with an IP address of 1.1.1.2/24.
Use public as the community name.
[Sysname] snmp-agent trap enable
[Sysname] snmp-agent target-host trap address udp-domain 1.1.1.2 udp
-port 5000 params securityname public
2
Configure NMS
With SNMPv1, the user needs to specify the read only community, the read and
write community, the time-out time, and number of retries. The user can inquire
and configure the router through the NMS. For detailed information, refer to the
NMS manuals.
n
The configurations on the agent and the NMS must match in order to perform the
related operations.
Configuration
Example for SNMP
Logging
Network requirements
■
NMS and Agent are connected through Ethernet
■
The IP address of NMS is 1.1.1.2/24
■
The IP address of the VLAN interface on Agent is 1.1.1.1/24
■
Configure community name, access right and SNMP version on Agent
Network diagram
Figure 626 Network diagram for SNMP logging
Terminal
Agent
NMS
Console
1.1.1.2/24
1.1.1.1/24