background image

A

BOUT

 T

HIS

 G

UIDE

This manual describes how to operate your H3C MSR 20/30/50 Series router. It 
includes the following sections about all of the major features of the routers.

This manual is intended for the following readers:

Network administrators

network engineers

Users who are familiar with the basics of networking

n

Always download the Release Notes for your product from the 3Com World Wide 
Web site and check for the latest updates to software and product 
documentation: 

http://www.3Com.com

Conventions

Table 1 lists icon conventions that are used throughout this guide.

Table 2 lists text conventions that are used throughout this guide.

Table 1   

Notice Icons

Icon

Notice Type

Description

n

Information note

Information that describes important features or 
instructions.

c

Caution

Information that alerts you to potential loss of data 
or potential damage to an application, system, or 
device.

w

Warning

Information that alerts you to potential personal 
injury.

Table 2   

Text Conventions

Convention

Description

Screen displays

This typeface represents information as it appears on the 
screen.

Keyboard key names

If you must press two or more keys simultaneously, the key 
names are linked with a plus sign (+), for example:

Press Ctrl+Alt+Del 

 The words “enter” and “type”

When you see the word “enter” in this guide, you must type 
something, and then press Return or Enter. Do not press 
Return or Enter when an instruction simply says “type.”

Summary of Contents for MSR 50 Series












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: