3Com MSR 50 Series, Configuration Manual

Page: 757 / 2443

Telnet Terminal Access Configuration 757
n
■
If both the global source IP address and the source IP address of a VTY are
configured, the one of the VTY is used.
■
The parameters for TCP connections must be configured before the TCP
connections are established. If you configure the parameters after a TCP
connection is established, the TCP connection must be reestablished for the
parameters to take effect. Pressing the reset hotkey on the terminal can
reestablish the TCP connection.
■
The receive buffer size must be configured before the terminal template is
applied. If you configure the receive buffer size after a terminal template is
applied, you need to remove the application of the terminal template and
apply the terminal template again for the receive buffer size to take effect.
Configure the router to
print information on
the terminal print information Optional
By default, the router prints
information on the terminal
Configure the router to
print the menu print menu Optional
By default, the menu is printed on
the terminal.
Use the print information
command before using this
command
Configure the
language of the print
information print language { chinese |
english }
Optional
Chinese by default
Set the terminal reset
hotkey resetkey ascii-code &<1-3> Optional
Not configured by default
Configure the
maximum size of data
to be sent at one time sendbuf bufsize size Optional
500 bytes by default
Configure the terminal
send buffer threshold sendbuf threshold value Optional
Not configured by default
Set the terminal
connectivity test
hotkey testkey ascii-code &<1-3> Optional
Not configured by default
Configure TCP
parameters tcp { recvbuf-size recvsize |
sendbuf-size sendsize |
nodelay | keepalive time
count }
Optional
By default, receive buffer size is
2,048 bytes, send buffer size is
2,048 bytes, delay is enabled,
keepalive interval is 50 seconds, and
the number of times for sending a
keepalive is 3.
Configure a
description for a VTY vty vty-number description
string
Optional
Not configured by default.
Configure a screen
code for a VTY screen vty vty-number screencode
string
Optional
Not configured by default
Configure the VTY
switching hotkey vty vty-number hotkey
ascii-code &<1-3>
Optional
Not configured by default
Update the
configuration update changed-config Optional
To do... Use the command... Remarks