manualshive.com logo in svg

3Com H3C S7503E-S CHASSIS, Installation Manual, Page: 191 / 200

Share
Download
3Com H3C S7503E-S CHASSIS Installation Manual Download Page 191

 

C-4 

liable for such interference problem and the expenses incurred therefrom shall be covered by the 
customers.  

 

This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a commercial environment. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful interference in which case the 
user will be required to correct the interference at his own expense. 

 

FDA 

H3C S7500E series( including H3C S7502E, H3C S7503E, H3C S7503E-S, H3C S7506E. H3C 
S7506E-S, H3C S7506E-V and H3C S7510E) Conform to the applicable requirements of 21 CFR 
Subchapter J  

Canada regulatory compliance 

ICES-003 

This Class A digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe  A est conforme à la norme NMB-003 du Canada. 

Japan regulatory compliance 

VCCI  

H3C S7500E series ( including H3C S7502E, H3C S7503E, H3C S7503E-S, H3C S7506E. H3C 
S7506E-S, H3C S7506E-V and H3C S7510E) comply with the requirements of  VCCI Class A 
Information Technology Equipment (ITE).  

Warning: 

If this equipment is used in a domestic environment, radio disturbance may arise. When such 

trouble occurs, the user may be required to take corrective actions. 

CISPR 22 compliance 

H3C S7500E series (including H3C S7502E, H3C S7503E, H3C S7503E-S, H3C S7506E. H3C 
S7506E-S, H3C S7506E-V and H3C S7510E) complies with the requirements of CISPR 22 for Class A 
Information Technology Equipment (ITE) 

Warning:

 If this equipment is used in a domestic environment, radio disturbance may arise. When such 

trouble occurs, the user may be required to take corrective actions. 

Summary of Contents for H3C S7503E-S CHASSIS









































































































































































































Reviews:

No comments