manualshive.com logo in svg

3Com H3C S7503E-S CHASSIS, Installation Manual, Page: 141 / 200

Share
Download
3Com H3C S7503E-S CHASSIS Installation Manual Download Page 141

 

5-5 

4)  Tighten the captive screws to fix the card. 
 

  

Put away the removed blank panel for future use.  
When installing or removing a card, keep the card parallel to the slot to prevent the card from scratching 
other parts in the chassis. 

 

Removing and Installing a Fan Tray 

 

 

Do not touch any naked wire, terminal or any part of the product labeled with a dangerous voltage to 
avoid injury. 
If you want to replace the fan tray of an in-service switch, separate the fan tray from the backplane to 
disconnect the power and wait for the fan stops rotating before pulling it out completely. Considering 
that the fan may be still rotating, avoid stretching your hands into the fan tray. 

 
The fan tray handle of the S7506E-V is slightly different from those of the S7502E, S7503E-S, S7503E, 
S7506E-S, S7506E, and S7510E. The fan tray handles of S7502E, S7503E-S, S7503E, S7506E-S, 
S7506E, and S7510E are fixed, while that of the S7506E-V is hidden in the groove of the fan tray. 
Therefore, you need to rotate the handle out of the groove before removing the fan tray from the 
S7506E-V or installing a fan tray on the S7506E-V. 

Summary of Contents for H3C S7503E-S CHASSIS









































































































































































































Reviews:

No comments