manualshive.com logo in svg

3Com H3C S7503E-S CHASSIS, Installation Manual, Page: 173 / 200

Share
Download
3Com H3C S7503E-S CHASSIS Installation Manual Download Page 173

 

7-3 

Case 

LED 

Color 

Status 

INPUT  

Green 

The power input is normal. 

OUTPUT  

Red 

The power module goes into the 

self-protection state. 

The power module is 

over-temperature protected. 

FAN  

Green 

The power module fan works normally.

INPUT  

Green 

The power input is normal. 

OUTPUT  

Green 

The power output is normal. 

The fan tray is faulty. 

FAN  

Red 

The power module fan is faulty. 

INPUT 

Green 

The power input is normal. 

OUTPUT 

Red 

No power is output 

Two seconds after the fan 

tray is faulty. 

FAN 

Red 

The power module fan is faulty. 

 

 

After the power supply is cut off, it takes a short while for the power LED to go off. This is normal.  

 
On the SRPUs, there are also LEDs indicating the working status of the power modules. For details, 
refer to related description about the power LEDs on the SRPUs other than the LSQ1MPUA0 in 
Chapter 1 “Product Overview”. 

Troubleshooting the PSR1400-D 

The power module PSR1400-D has four LEDs, which indicate the input and output statuses of the 
power module and the working statuses of the power module fan and the PoE power supply, 
respectively. 

Table 7-2 

Description of LEDs on the PSR1400-D 

Case 

LED 

Color 

Status 

INPUT  

OFF 

The power input is normal. 

OUTPUT  

OFF 

No power is output. 

FAN  

OFF 

A fan does not rotate. 

The power module is 

connected but the SYSTEM 

power switch is turned off. 

PoE 

OFF 

No PoE is output. 

INPUT 

Green 

The power input is normal. 

OUTPUT 

Green 

The power output is normal. 

FAN 

Green 

The power module fan works normally.

The power module is 

connected and the SYSTEM 

power switch is turned on, but 

the PoE switch is turned off. 

PoE 

OFF 

No PoE is output. 

INPUT 

Green 

The power input is normal. 

OUTPUT 

Green 

The power output is normal. 

FAN 

Green 

The power module fan works normally.

The power module is 

connected, and the SYSTEM 

power switch and PoE switch 

are turned on. 

PoE 

Green 

PoE is output. 

Summary of Contents for H3C S7503E-S CHASSIS









































































































































































































Reviews:

No comments