manualshive.com logo in svg

3Com H3C S7503E-S CHASSIS, Installation Manual, Page: 175 / 200

Share
Download
3Com H3C S7503E-S CHASSIS Installation Manual Download Page 175

 

7-5 

Troubleshooting Fans 

Table 7-3 

Description of fan LEDs 

LED 

Status 

Description 

ON 

All fans work normally. 

OK (Green) 

OFF 

A fan tray is faulty or no fan is installed. 

ON 

A fan tray is faulty or no fan is installed. 

FAIL (Red) 

OFF 

All fans work normally. 

 
If the OK LED is OFF, check whether: 

z

 

Every heat dissipation fan works normally. 

z

 

Something blocks the vent of the chassis. 

z

 

A blank panel is installed on the slot without a card. 

Troubleshooting LPUs 

Table 7-4 

Description of LPU LEDs 

LED 

Status 

Description 

ON/OFF 

 

The LPU is faulty or is not installed yet.

 

RUN (Green)

 

Flashing 

The LPU works normally. 

OFF 

 

The LPU is faulty or is not installed yet.

 

ALM (Red)

 

ON  

The LPU works abnormally. 

 

z

 

If the ALM LED of an LPU stays ON, something is wrong with the LPU. When you reset the LPU, 
the ALM LED will turn on. After normal booting, the LED will be OFF. 

z

 

When resetting an LPU, if the ALM LED stays OFF, the LPU may be disconnected from the power 
supply. Check if the LPU is properly installed. 

Summary of Contents for H3C S7503E-S CHASSIS









































































































































































































Reviews:

No comments