3Com EtherLink 10, User Manual

Page: 42 / 90

42 C
HAPTER
5: N
ET
W
ARE
D
RIVERS
Verifying the
PCI Slot Number
To verify the PCI slot number that the NIC is installed in:
1 Boot the NetWare server with the -na option. (This prevents the AUTOEXEC.NCF
from loading.)
Example:
server -na
2 Issue the load command for the NIC LAN driver without a slot parameter.
Example:
load c:\nwserver\3c99x.lan
3 NetWare will list the valid slot number(s) for the NIC, depending on how many
NICs are installed. The values appearing in the list are the slot values that you
should use.
Example:
After you issue the command, a message appears. At the end of the message,
additional text similar to the following appears:
Total of 2 3C99x PCI adapter card(s) found. Supported slot values are
2,3.
Slot:2