1-10
Follow these steps to enable the system information display on the console:
To do…
Use the command…
Remarks
Enable the debugging/log/trap
information terminal display function
terminal monitor
Optional
Enabled by default.
Enable debugging information
terminal display function
terminal debugging
Optional
Disabled by default.
Enable log information terminal
display function
terminal logging
Optional
Enabled by default.
Enable trap information terminal
display function
terminal trapping
Optional
Enabled by default.
Make sure that the debugging/log/trap information terminal display function is enabled (use the
terminal monitor
command) before you enable the corresponding terminal display function by using
the
terminal debugging
,
terminal logging
, or
terminal trapping
command.
Setting to Output System Information to a Monitor Terminal
System information can also be output to a monitor terminal, which is a user terminal that has login
connections through the AUX, or VTY user interface.
Setting to output system information to a monitor terminal
Follow these steps to set to output system information to a monitor terminal:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable the information
center
info-center enable
Optional
Enabled by default.
Enable system
information output to
Telnet terminal or
dumb terminal
info-center monitor channel
{
channel
-
number | channel
-
name
}
Optional
By default, a switch outputs
log/debugging/trap information to
a user terminal through
information channel 1.
Configure the output
rules of system
information
info
-
center source
{
modu
-
name
|
default
}
channel
{
channel
-
number |
channel
-
name
} [ {
log
|
trap
|
debug
}
{
level
severity
|
state
state
} ]*
Optional
Refer to
Table 1-4
for the default
output rules of system
information.
Set the format of time
stamp in the output
information
info-center timestamp
{
log | trap
|
debugging
} {
boot
|
date
|
none
}
Optional
By default, the time stamp format
of the log and trap output
information is
date
, and that of
the debugging output information
is
boot
.
