1-20
Configuring whether first-time authentication is supported
When the device connects to the SSH server as an SSH client, you can configure whether the device
supports first-time authentication.
z
With first-time authentication enabled, an SSH client that is not configured with the server host
public key can continue accessing the server when it accesses the server for the first time, and it
will save the host public key on the client for use in subsequent authentications.
z
With first-time authentication disabled, an SSH client that is not configured with the server host
public key will be denied of access to the server. To access the server, a user must configure in
advance the server host public key locally and specify the public key name for authentication.
Follow these steps to enable the device to support first-time authentication:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enable the device to support
first-time authentication
ssh client first-time enable
Optional
By default, the client is enabled
to run first-time authentication.
Follow these steps to disable first-time authentication support:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Disable first-time authentication
support
undo ssh client first-time
Required
By default, the client is enabled
to run first-time authentication.
Configure server public key
Refer to
Configuring the Public
Key of a Client on the Server
Required
The method of configuring
server public key on the client is
similar to that of configuring
client public key on the server.
Specify the host key name of
the server
ssh client
{
server-ip
|
server-name
}
assign
publickey keyname
Required
With first-time authentication enabled, an SSH client that is not configured with the SSH server's host
public key saves the host public key sent by the server without authenticating the server. Attackers may
exploit the vulnerability to initiate man-in-middle attacks by acting as an SSH server. Therefore, it is
recommended to disable first-time authentication unless you are sure that the SSH server is reliable.
Specifying a source IP address/interface for the SSH client
You can configure a souce IP address or the souce IP address by specifying the corresponding
interface for the client to use to access the SSH server. This improves the service manageability when
the SSH client has multiple IP addresses and interfaces
