manualshive.com logo in svg

3Com E4500-24, Cli Configuration Manual


Share
Download
background image

 

2-17 

 

z

 

Generally, the access users are named in the 

userid@isp-name

 or 

userid.isp-name

 format. Here, 

isp-name 

after the “

@”

 or “.” character represents the ISP domain name, by which the device 

determines which ISP domain a user belongs to. However, some old RADIUS servers cannot 

accept the usernames that carry ISP domain names. In this case, it is necessary to remove domain 

names from usernames before sending the usernames to RADIUS server. For this reason, the 

user-name-format

 command is designed for you to specify whether or not ISP domain names are 

carried in the usernames to be sent to RADIUS server. 

z

 

For a RADIUS scheme, if you have specified to remove ISP domain names from usernames, you 

should not use this RADIUS scheme in more than one ISP domain. Otherwise, such errors may 

occur: the RADIUS server regards two different users having the same name but belonging to 

different ISP domains as the same user (because the usernames sent to it are the same). 

z

 

In the default RADIUS scheme "system", ISP domain names are removed from usernames by 

default. 

z

 

The purpose of setting the MAC address format of the Calling-Station-Id (Type 31) field in RADIUS 

packets is to improve the switch’s compatibility with different RADIUS servers. This setting is 

necessary when the format of Calling-Station-Id field recognizable to RADIUS servers is different 

from the default MAC address format on the switch. For details about field formats recognizable to 

RADIUS servers, refer to the corresponding RADIUS server manual. 

 

Configuring the Local RADIUS Server 

The switch provides the local RADIUS server function (including authentication and authorization), also 

known as the local RADIUS server function, in addition to RADIUS client service, where separate 

authentication/authorization server and the accounting server are used for user authentication.  

Follow these steps to configure the local RADIUS server function: 

To do… 

Use the command… 

Remarks 

Enter system view 

system-view 

— 

Enable UDP ports for local 
RADIUS services 

local-server enable 

Optional 

By default, the UDP ports for 
local RADIUS services are 
enabled. 

Configure the parameters of 
the local RADIUS server 

local-server nas-ip

 

ip-address 

key password

 

Required 

By default, a local RADIUS 
server is configured with an 
NAS IP address of 127.0.0.1. 

 

Summary of Contents for E4500-24

















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for E4500-24

Xunison Hub M50 Mesh Cube Quick Start Manual preview
Hub M50 Mesh Cube
Brand: Xunison Pages: 11
Contemporary Controls EISK5-100T/H Installation Manual preview
EISK5-100T/H
Brand: Contemporary Controls Pages: 4
Technische Alternative AI5S-DL Operator'S And Programming Manual preview
AI5S-DL
Brand: Technische Alternative Pages: 4
Cabletron Systems MicroMMAC-22E Installation Manual preview
MicroMMAC-22E
Brand: Cabletron Systems Pages: 83
Versa Technology VX-GPH8245 User Manual preview
VX-GPH8245
Brand: Versa Technology Pages: 26
Linkskey LKV-T02 Quick Installation Manual preview
LKV-T02
Brand: Linkskey Pages: 2
DANLERS CESRA PIR 10VDC Installation Notes preview
CESRA PIR 10VDC
Brand: DANLERS Pages: 2
ClimaxDigital CHM0402V3 User Manual preview
CHM0402V3
Brand: ClimaxDigital Pages: 9
Triax TMS 5XX SE AQ-EU Series User Manual preview
TMS 5XX SE AQ-EU Series
Brand: Triax Pages: 6
3Com LANPLEX 2500 EXTENDEDPLEX 2500 EXTENDED User Manual preview
LANPLEX 2500 EXTENDEDPLEX 2500 EXTENDED
Brand: 3Com Pages: 186
H-Tronic WPS 3000 Manual preview
WPS 3000
Brand: H-Tronic Pages: 20
ATEN VM0404 User Manual preview
VM0404
Brand: ATEN Pages: 31
LevelOne FEP-0931 Quick Installation Manual preview
FEP-0931
Brand: LevelOne Pages: 17
QSFPTEK S5300-24P4TS Quick Start Manual preview
S5300-24P4TS
Brand: QSFPTEK Pages: 11
Novus NVS-5116SP User Manual preview
NVS-5116SP
Brand: Novus Pages: 24
Equip Desktop KVM Switch Manual preview
Desktop KVM Switch
Brand: Equip Pages: 10
Cambium Networks cnMatrix EX1K Basic Configuration Manual preview
cnMatrix EX1K
Brand: Cambium Networks Pages: 28
ICP DAS USA LP-2841M Series Update Manual preview
LP-2841M Series
Brand: ICP DAS USA Pages: 7

Brands by name

Popular brands

Load more brands