3Com 3CR990, User Manual

Page: 32 / 90

32 C
HAPTER
4: W
INDOWS
D
RIVERS
Windows NT 4.0
This section describes how to install the network driver and NIC software in a PC
or server running Windows NT 4.0.
To install the software:
1 Turn the PC power on.
2 Right-click the Network Neighborhood icon, then select Properties .
The Network screen appears.
3 Select the Adapters tab.
If networking has not been previously installed on your system, Windows asks you
if you want to install networking. Click
Yes .
See the WINNT.TXT file (located in the Help directory on the EtherCD ) or your
Windows NT documentation for detailed instructions about installing networking.
4 Click Add .
The Select Network Adapter screen appears.
5 Insert the CD in the CD-ROM drive, and then click Have Disk .
The Insert Disk screen appears.
6 Make sure that the correct path to your CD-ROM drive appears in the entry box,
and then click
OK .
The Select OEM Option screen appears.
7 Make sure that the correct 3Com NIC name is selected, and then click OK .
Files are copied. The Network screen appears with the 3Com NIC name listed in
the Network Adapters list box.
8 Click Close .
If the Microsoft TCP/IP Properties screen appears, consult your system
administrator for further information.
The Network Settings Change screen appears, prompting you to restart your
computer.
9 Click Yes .
The installation is complete. To verify that the driver was successfully installed
Go to: Verifying Successful Installation .
Windows NT 3.51
This section describes how to install the network driver and NIC software in a
PC or server running Windows NT 3.51.
To install the software:
1 Make sure that the NIC is installed in your PC and that it is connected to
the network.
2 Turn the PC power on.
3 In the Main window of the Program Manager, double-click the Control Panel
icon and then the Network icon.
The Network Settings screen appears.
NOTE: You must restart your computer to complete the installation.