3Com 3102, Manual, Page: 79 / 128

Transferring a Call to Another User’s Voice Mail 79
mail, the feature applies to all phones—an incoming call rings once on
all of the phones and is then sent to your voice mailbox.
■
If you enable forward to voice mail while one or more calls are ringing,
the pending calls are sent to your voice mailbox and forward to voice
mail is enabled for all subsequent calls.
■
If you are a Hunt Group member, personal (non-Hunt Group) calls go
to your voice mailbox. However, Hunt Group calls always ring on a
member’s phone, regardless of your personal phone setting.
To forward incoming calls to your voice mailbox for a Business Telephone
(either Model 2102 or 3102):
1 Press Fwd Mail . The red light next to the button comes on. All future
calls are sent to your voice mailbox.
2 If forward to voice mail is not enabled, you can send a call that is ringing
(and all subsequent calls) to your voice mailbox by pressing
Fwd Mail .
3 To disable this feature, press Fwd Mail again. The light goes out and calls
ring normally.
To forward incoming calls to your voice mailbox for any VCX phone
(including the Model 2101, which does not have a
FWD Mail button):
1 Press Feature + 440 . All future calls transfer automatically to your voice
mailbox.
2 If you have not enabled this feature code, you can send a call that is
ringing (and all subsequent calls) to your voice mailbox by pressing
Feature + 440 .
3 To disable this feature, press Feature + 440 . All calls ring normally.
Transferring a Call
to Another User’s
Voice Mail
You can transfer a connected call directly to another subscriber’s voice
mail rather than that subscriber’s phone extension.
To transfer a call to another subscriber’s voice mail:
1 While on a call, press Feature + 441 .
The Display Panel shows the following prompt:
Transfer VMail Number:
2 Enter the extension of the subscriber whose mailbox will receive the call
and press
# .