![background image](http://html1.mh-extra.com/html/3com/3102/3102_manual_3092912058.webp)
58
C
HAPTER
7: B
ASIC
T
ELEPHONE
O
PERATION
■
Advanced Settings
— Configures network parameters.
CAUTION:
This option is for administrator use only. Unauthorized
modification of these parameters will disconnect your phone.
Controlling the
Volume
Use the
Volume Control
buttons to raise or lower the volume of the
ringer, handset, or speaker.
Adjusting the volume control of one device DOES NOT affect the volume
control of the other devices. For example, lowering the volume of the
speaker has no effect on the handset volume. Changes you make to any
device remain in effect if you reset the phone to its default settings.
■
Ringer Volume
—
To raise or lower the volume of the ring, press the
up or down
Volume Control
button repeatedly
while your telephone
is ringing
, until the volume is at the level that you prefer.
■
Handset Volume
— To raise or lower the volume of the dial tone and
the voice level of your callers, lift the handset then press the up or
down
Volume Control
buttons repeatedly until the volume is at the
level you prefer. You can change the volume during a conversation or
by listening to the dial tone.
■
Headset Volume
(Model 3102 only) — During a call, press the up or
down
Volume Control
buttons repeatedly until the volume is at the
level you prefer.
■
Speaker Volume
— To raise or lower the volume of the speaker,
press the
Speaker
button and then press the up or down
Volume
Control
button repeatedly until the volume is at the level you prefer.
You can change the volume during a conversation or by pressing
Speaker
and listening to the dial tone.
When you press a
Volume Control
button, the Display Panel shows the
volume setting as a series of dark vertical bars. Repeatedly pressing a
Volume Control
button raises the volume (increases the number of
displayed bars) or lowers the volume (decreases the number of displayed
bars.
You can also use Feature Codes to adjust the volume. Pressing
Feature
+
102
raises the volume (increases the number of displayed bars
by one). Pressing
Feature
+
103
lowers the volume (decreases the
number of displayed bars by one).