3Com 3101, User Manual

Page: 88 / 134

88 C
HAPTER
7: G
ETTING
M
ORE FROM
Y
OUR
T
ELEPHONE
S
YSTEM
3 Dial the hunt group password.
4 Hang up the telephone.
Your administrator can configure a hunt group to an Access button. To
log in to or to log out of the hunt group, press the specified Access
button. The indicator next to the button lights to show that you are
logged in.
On the 3Com 2101 Basic Telephone, the display panel shows the
message
IN.
To log in to a dynamic hunt group using the NBX NetSet utility:
1 Log in to NBX NetSet > Hunt Groups .
2 Select the hunt group to which you want to log in.
3 Click Log In , and then click Close .
If you log in to a dynamic hunt group and do not answer a call when it
rings on your telephone, the system may log you out of the group
depending on how the administrator has configured the group.
To log out of a dynamic hunt group using the NBX NetSet utility:
1 Log in to NBX NetSet > Hunt Groups .
2 Select the hunt group from which you want to log out.
3 Click Log Out, and then click Close .
To log in to all hunt groups of which you are a member:
1 Log in to NBX NetSet > Hunt Groups .
2 Click the Login all button.
To log out of all hunt groups of which you are a member:
1 Log in to NBX NetSet > Hunt Groups .
2 Click the Logout all button.
Calling Groups One type of hunt group is the Calling Group . Calling groups allow an
incoming call to ring simultaneously on all telephones in a group, for
example, a customer service group. To log in to or out of a calling group,
follow the steps in
“Hunt Groups” earlier in this chapter.