2N ISDN BRI GSM, User Manual

Page: 85 / 109

2N - ISDN BRI GSM Enterprise Gateway
•
Table of replaced prefixes – a table of prefixes to be replaced
(e.g. '+420' with '0'). This change is made before the prefix
table is checked.
•
Table of prefixes – a table of called prefixes. You can define
the dialling length too here. If you do not enter the dialling
length, the
Default count of digits will be used automatically.
•
GSM network ID – a numerical identification code of the
selected prefix table used for internal identification purposes
only. It has no influence on call routing.
•
Default count of digits – used for defining the count of digits to
be considered if the count is not included in the prefix table.
8.11. LCR table
The LCR (Least Cost Routing) table helps define the call routing
procedure according to the called subscriber's number depending
on the day time and day in a week (refer to Subs. 5.3 and 5.4).
The LCR table setting using the GSM configuration software is
discussed in this subsection.
Fig. 57 – LCR table
•
Add – this button adds a record into the LCR table. By pressing
it you open the editing window (see Fig. 58).
75