2N ISDN BRI GSM, User Manual

Page: 58 / 109

2N - ISDN BRI GSM Enterprise Gateway
7.1. ISDN GSM Program Installation
By inserting the installation CD in the CD-ROM drive you initiate
installation automatically. If you have not enabled the CD autorun
function, initiate installation by opening the
setup.exe file of the
BRI Enterprise software. Follow the installer instructions and wait
until the installation has been completed. The guides and
autoupdate program are installed together with the BRI Enterprise
software.
7.2. Running of ISDN GSM Control Program
When the installation has been completed, run the program by
clicking on
ISDN GSM Enterprise program in your PC software
menu, or clicking on the desktop icon, or opening the
BRIEnterpriseProgram.exe file that you will find in the respective
location installed by you using any explorer or file browser.
A configuration window, which is used for setting up of
parameters related with control of the gateway, appears after the
run of the program. For
administration of only one gateway is
the following procedure not necessary. It is possible to operate
with default configuration file, which name is
config.cfg and is
saved in directory with configuration program.
Saving
parameters to the configuration file is automatic by switching
items in topic or alphabetical glossary tag.
To facilitate the administration of more than one 2N - BRI ISDN
GSM Enterprise gateway it is possible to use Gateway selection
window. This window is located in menu
“File – Gateway
Selection” (see sub. 7.3). Selection of this opens window shown at
Fig. 40.
48