2N ISDN BRI GSM, User Manual

Page: 83 / 109

2N - ISDN BRI GSM Enterprise Gateway
•
Receive incoming calls + dialtone – incoming GSM calls
are received incoming calls from the GSM network are
received and, if defined so, the DTMF with a simulated
dialtone is enabled for the incoming call.
•
CallBack after ring / Reject – in case the CLIP is
included in the CallBack table, a CallBack is made. The
GSM gateway rejects the incoming call and makes an
automatic CallBack.
•
CallBack after ring / Ignore – in case the CLIP is
included in the CallBack chart, a CallBack is made. The
incoming call is ignored. If the calling subscriber does
not hang up within the defined timeout (default = 10s),
the CallBack function is ignored and the call is processed
normally (refer to Subs. 5.5).
•
Report to PC + voice message – the GSM gateway sends
information on an incoming call to the PC equipped with
the call routing software. The DTMF with a voice
message may be enabled for the incoming call.
•
Report to PC + dialtone – the GSM gateway sends
information on an incoming call to the PC equipped with
the call routing software. The DTMF with a simulated
dialtone may be enabled for the incoming call.
•
Min. digits in DTMF - the minimum number of digits
required by the gateway in the DTMF.
•
Max. digits in DTMF - the maximum number of digits
accepted by the gateway in the DTMF.
•
Tout for entering DTMF digits [s] – a timeout during which
the GSM gateway waits for the first / another DTMF digit. If
0 is selected, the incoming call is connected automatically to
the numbers included in the List of called numbers .
•
Day of deleting incoming stats – defines a day in a month on
which statistical data on incoming calls are deleted. By
setting this parameter at
0 you disable this function.
•
Prefix before DISA – a digital prefix to precede the DTMF
automatically.
73