2N ISDN BRI GSM, User Manual

Page: 90 / 109

2N - ISDN BRI GSM Enterprise Gateway
9.1. USB Communication Settings
You can, e.g., use the HyperTerminal communication software for
communication using a USB port connected as a virtual COM
port. To set communication select the following parameters:
Transmission rate: 921600 bps
Data bits: 8
Parity: none
Stop bits: 1
Flow control: none
9.2. LAN Communication Settings
To communicate with the 2N - ISDN BRI GSM Enterprise
gateway through the LAN, set the LAN IP address first. To do this
you need a direct USB PC connection. You can use such programs
as
HyperTerminal, Putty , etc. for communication.
IP address: gateway address set by you
Port: 23
9.3. Terminal Communication
The terminal is also part of the GSM configuration software. To
start the terminal use
Functions – Other functions – Terminal from
the main menu. Be sure to configure the GSM program properly
for communication (refer to Subs. 7.3,
Functions ).
9.4. GSM Gateway Behaviour
The gateway behaves like an ANSI terminal with an echo. The
commands are entered in the text format and the Y-modem
protocol is used for file transfer. An access password may be set. If
the password is required, the gateway returns a ´
PASSWORD:´
prompt , if the password has been entered or is not required, the ' > '
prompt is used.
80