2N BlueStar, User Manual

Page: 89 / 177

Configuration Tool 3.4
89
o
VoIP-SIP – use this type of protocol when the connected gateway
contains a VoIP card.

Enable FW upgrade through Ethernet
Use this parameter to activate/deactivate upgrading of the basic CPU and
VoIP card firmware over the TCP/IP connection.
o
Port – the IP port used for remote firmware upgrade. The default value
is 2222. Please do not use the standard IP port values, which are
reserved for other well-known TCP/IP services.
Examples of common services and assigned IP ports:
Service IP port number
http 80
ftp 20,21
Telnet 23
SSH 22
SMTP 25,161,162,366
NTP 123
DNS 53
BOOTP 67,68
TFTP 69
POP 109,110
SFTP 115
IMAP 143,220
LDAP 389
HTTPS 443

This is for orientation only. For a complete list refer to the Well-known ports on the Internet.
VoIP Parameters
This window allows you to set all parameters related to the VoIP interface.
Tip

You have to restart the VoIP card upon any VoIP setting change.