2N BlueStar, User Manual

Page: 152 / 177

List of Status Codes 4.2
152
PINSET PIN value sending to module INFO
BLOCK Module blocked temporarily or permanently (see Layer 2 information) INIT
SETUP Module configuration running IDLE
SLEEP Module sleep running (transition to BLOCK status) BLOCK
NWAIT Awaiting GSM log-in SETUP
IDLE Rest status, can start/receive call, execute AT&G command CALL/CMD
CALL Call running (call establishing, connected call, call end) IDLE
CMD Communicating with module upon AT&G command IDLE
INFO Information loading from module and SIM card NWAIT
GSM Layer 2 Info for BLOCK
Name Description
(block) Blocked by AT&G command, terminated by module, board or system reset
Netw-reg GSM log-in refused (not activated SIM), next attempt in 5..60 minutes
Clir-err CLIR activation request refused, next attempt in 2..10 minutes
Mod-err Defective or unconnected GSM module, next attempt in 2 minutes
Pin-err Wrong PIN, permanently in BLOCK status
Sim-err Defective or non- inserted SIM card, next attempt in 2 minutes
Log-out Temporarily logged-out according to parameter X00
Puk-req SIM card requires PUK
(undef) This position of SIM card was not checked by gateway
GSM Layer 3
Name Description
NULL Rest status, ready for call
CINIT Request of call to GSM (from Layer 4)
OPROC Call to GSM is connected
CDELIV Call to GSM is ringing
CPRES Indication of call from GSM (from Layer 2)
CRECV Call from GSM is ringing on ISDN interface
IPROC Call from GSM is processed by ISDN interface
ACTIVE Connected call
DISREQ Disconnection request (to Layer 2)
DISIND Indication of disconnection (from Layer 2)
RELREQ Module release for another call (to Layer 2)
OVRECV Reading of DTMF dialling from GSM (from Layer 2)
RELIND Indication of module release (from Layer2)
Link Layer Statuses