2N BlueStar, User Manual

Page: 103 / 177

Configuration Tool 3.4
103
Caution

This feature must be supported by your wireless network provider.
Otherwise it may cause failure of outgoing calls to wireless network!

Roaming enabled for network
Enable the SIM card to log in to roaming networks. To do so, add a whole or
part of the MCC+MNC code (international identification code for wireless
networks). Leave the field free if you want to keep the roaming access
disabled for SIM cards. Examples of correct inputs:
Input Note
<empty> Roaming is restricted
2300 Roaming is restricted (minimum is five digits)
23002 Roaming is permitted for network with MCC+MNC code 23002
230XX Roaming is permitted for network with MCC+MNC codes 23000 – 23099
XX001 Roaming is permitted for network with MCC+MNC codes 00001 – 99001
XXXXX Roaming is permitted for any network
Note

Before activating the roaming support, please check the SIM card for
correct setting of the GSM / UMTS priority network list.
Caution

Calls via roaming networks may cause additional call costs!

CLIR
Use the parameter to enable/disable the CLIR and CLIP functions for outgoing
calls via the SIM cards in selected positions:
o
Default – CLIP and CLIR will be used according to the wireless network
settings.
o
Disable (CLIP – on) – CLIR is disabled and CLIP is temporarily enabled.
o
Enable (CLIP – off) – CLIR is enabled and CLIP is temporarily disabled.
Caution

The CLIP and CLIR functions are wireless network services. In case your
network disallows temporary activation of the CLIP / CLIR function, set the
Default value.

A wrong setting of this parameter may cause failure of outgoing calls!