2N BlueStar, User Manual

Page: 97 / 177

Configuration Tool 3.4
97
others digits will be sent in the OVERLAP dial mode.
Example of use:
Called party number: 6012345678, digits count in SETUP = 7
Outgoing signalling messages:
SETUP (contains 6012345)
INFO (6)
INFO (7)
INFO (8)

Receive dial number from Subaddress
With this parameter activated, the gateway uses the digits in the
Subaddress field instead of the Called party number for outgoing dialling.

Hungarian dial tone after two digits
A specific feature designed for the Hungarian national dialling plan. The
gateway activates a specific dialtone for second dialling after receiving two
digits.

Do not send CONNECT_ACK on TE
When the ISDN PRI is in the TE mode, the gateway will not send the
CONNECT_ACK message.

Tone signalling
National settings of dialling and ringing tones. You can enable the busy tone
in the case of call reject.

Numbering plan settings
Use these parameters to set the right numbering plan for the Called and
Calling party numbers according to DSS1 signalling protocol.
GSM Basic Settings
This window allows you to set basic parameters related to the wireless interfaces.