2N BlueStar User Manual Download Page 121

Page: 121 / 177

Enhanced CPU Configuration

3.5

121

Gateway Configuration

This section is identical with the configuration via the configuration tool (Subs. 3.4).

All settings are saved to the basic CPU via the Telnet protocol. Some changes can
cause the gateway restart and make the basic CPU temporarily unavailable.

SIM Client

It is a functional part of the 2N

SIM Star system. This process is designed for

translation of data streams of remote SIM cards to GSM modules and vice versa.



Information

Information on the SIM Client software version (upgrade is possible as part of
the eCPU firmware).



Channels

The current state of all wireless channels connected to 2N

SIM Star.



Settings

Settings of the username, password and IP port used for communication with
2N

SIM Star.



Restart

Possibility to restart the SIM Client process.

Summary of Contents for BlueStar


















































































































































































Search results

Summary of Contents for BlueStar

Reviews:

Related manuals for BlueStar

Brands by name

Popular brands

2N BlueStar, User Manual

Search results

Summary of Contents for BlueStar

Reviews:

Related manuals for BlueStar

Brands by name

Popular brands