Installation Guide for the 2GIG EDGE Security Panel
66
ANSI/SIA CP-01-2010 Features to Limit False Alarms
For compliance with
ANSI/SIA CP-01-2010: Control Panel Standard - Features for False Alarm Reduction
, the installer can set a variety of
different options designed to limit occurrences of a False Alarm.
ANSI/SIA CP-01-2010
2GIG System Feature
Installation & Programming Guide
4.2.2.1
Exit Time
Exit Delay
“Q201: Exit delay, in seconds (45-120)”
“Q116: Allow quick exit”
4.2.2.2
Progress Annunciation
Exit Delay Announcement
“Q201: Exit delay, in seconds (45-120)”
4.2.2.3
Exit Time Restart
Exit Delay Restart
“Q115: Exit delay restart”
4.2.2.4
Exit Error
Exit Error
See the User Guide for the 2GIG EDGE Panel
4.2.2.5
Unvacated Premises
Auto Stay
“Q114: Auto stay”
4.2.3.1
Entry Delay
Entry Delay
“Q202: Entry delay 1, in seconds (30-240)”
“Q203: Entry delay 2, in seconds (30-240)”
4.2.3.2
Progress Annunciation
Entry Delay Announcement
“Q101: Enter installer code (4 or 6 digits)”
4.2.3.3 Disarm
Disarming Features
See the User Guide for the 2GIG EDGE Panel
4.2.4.1
Control Buttons
Keyfob/Remote Arming Mode on System Not Ready.
“Q121: Keyfob/remote arming mode on system not ready”
4.2.4.2
Manual Alarms
Emergency Alarm Features
See the User Guide for the 2GIG EDGE Panel
4.2.4.3
System Acknowledgment
Alert Keyfob Disarming After Alarm
Keyfob Arm/Disarm Confirmation
“Q119: Alert on disarm with keyfob after alarm”
“Q120: Keyfob arm/disarm confirmation”
4.2.4.4
Remote Arming
Key Fob Arming
“Q119: Alert on disarm with keyfob after alarm”
4.3.4.5
Remote Disarming
Key Fob Arming
“Q120: Keyfob arm/disarm confirmation”
4.2.5.1
Abort Window
Abort Window Dialer Delay
“Q205: Alarm abort window transmission delay”
4.2.5.1.1 Disarm
Abort Window Dialer Delay
“Q502: Periodic test, in days (0-255)”
4.2.5.1.2 Abort
Abort Window Dialer Delay
“Q502: Periodic test, in days (0-255)”
4.2.5.2
Alarm Transmission
Abort Window Dialer Delay
“Q205: Alarm abort window transmission delay”
4.2.5.3 Disarm
Disarm
See the User Guide for the 2GIG EDGE Panel
4.2.5.4
Cancel Window
Alarm Cancel Time, Alarm Cancel Display
“Q204: Alarm cancel time, in minutes (5-255)”
4.2.6.1
Use of Duress Feature
User Duress Report
“Covert Distress Signal”
4.2.6.2
Duress Code
Duress Code
“User Duress Pin”
4.2.7
Initiation of Manual Alarms
Panic, Fire, or Emergency Alarm
See the User Guide for the 2GIG EDGE Panel
4.3.
Cross Zoning
Cross Sensor Zones, Cross Sensor Timeout
“Q123: Cross sensor zones 99-100”
“Q209: Cross sensor timeout, in seconds (10-120)”
4.3.2
Swinger Shutdown
Swinger Shutdown Count (1-6)
“Q208: Swinger shutdown count (1-6)”
“Q517: Alarm restore reports to CS”
4.3.3
Fire Alarms
Fire & Carbon Monoxide Protection
“Sensor Type — 24-Hour Fire”
“Sensor Type — 24-Hour Fire Verification”
4.6.3
System Test
Console Test
Sensors Test
“Testing the System”
