ZyXEL Communications ZyWALL USG Series Скачать руководство пользователя страница 142

Страница: 142 / 426

Chapter 19 Virtual Servers

ZyWALL / USG (ZLD) CLI Reference Guide

142

The following table lists the virtual server commands.

Table 76

ip virtual-server Commands

COMMAND

DESCRIPTION

show ip virtual-server [

profile_name

]

Displays information about the specified virtual server or about all the virtual
servers.

no ip virtual-server

profile_name

Deletes the specified virtual server.

ip virtual-server

profile_name

interface

interface_name

original-ip

{any |

address_object

} map-to

{

address_object

} map-type

any

[nat-loopback [nat-1-1-map]

[deactivate] | nat-1-1-map

[deactivate] | deactivate]

Creates or modifies the specified virtual server and maps the specified
destination IP address (for all destination ports) to

the specified destination

address object or IP address

. The original destination IP is defined by the

specified interface (any), the specified IP address (IP), or the specified
address object (

address-object

). NAT loopback allows local users to use a

domain name to access this virtual server.

Select what kind of NAT this rule is to perform.

nat-1-1-map

: means the NAT type is either 1:1 NAT or many 1:1 NAT. See

Section 19.1.1 on page 141

for more information.

Using this command without

nat-1-1-map

means the NAT type is Virtual

Server. This makes computers on a private network behind the ZyWALL / USG
available to a public network outside the ZyWALL / USG (like the Internet).

The

deactivate

command disables the virtual server rule.

ip virtual-server

profile_name

interface

interface_name

original-ip

{any | IP |

address_object

} map-to

{

address_object

} map-type

port

protocol {any | tcp | udp} original-

port <1..65535> mapped-port

<1..65535> [nat-loopback [nat-1-1-

map] [deactivate] | nat-1-1-map

[deactivate] | deactivate]

Creates or modifies the specified virtual server and maps the specified
(destination IP address, protocol, and destination port) to

the specified

(destination IP address and destination port)

. The original destination IP is

defined by the specified interface (any), the specified IP address (IP), or the
specified address object (

address-object

). NAT loopback allows local users

to use a domain name to access this virtual server.

nat-1-1-map

: means the NAT type is either 1:1 NAT or many 1:1 NAT. See

Section 19.1.1 on page 141

for more information.

Using this command without

nat-1-1-map

means the NAT type is Virtual

Server. This makes computers on a private network behind the ZyWALL / USG
available to a public network outside the ZyWALL / USG (like the Internet).

The

deactivate

command disables the virtual server rule.

ip virtual-server

profile_name

interface

interface_name

original-ip

{any | IP |

address_object

} map-to

{

address_object

} map-type

ports

protocol {any | tcp | udp} original-

port-begin <1..65535> original-port-

end <1..65535> mapped-port-begin

<1..65535> [nat-loopback [nat-1-1-

map] [deactivate] | nat-1-1-map

[deactivate] | deactivate]

Creates or modifies the specified virtual server and maps the specified
(destination IP address, protocol, and range of destination ports) to

the

specified (destination IP address and range of destination ports)

. The original

destination IP is defined by the specified interface (any), the specified IP
address (IP), or the specified address object (

address-object

). NAT

loopback allows local users to use a domain name to access this virtual
server.

nat-1-1-map

: means the NAT type is either 1:1 NAT or many 1:1 NAT. See

Section 19.1.1 on page 141

for more information.

Using this command without

nat-1-1-map

means the NAT type is Virtual

Server. This makes computers on a private network behind the ZyWALL / USG
available to a public network outside the ZyWALL / USG (like the Internet).

The

deactivate

command disables the virtual server rule.

Содержание ZyWALL USG Series











































































































































































































































































































































































































































Результаты поиска

Содержание ZyWALL USG Series

Отзывы:

Похожие инструкции для ZyWALL USG Series

Бренды по названию

Популярные бренды

ZyXEL Communications ZyWALL USG Series, Справочное руководство

Результаты поиска

Содержание ZyWALL USG Series

Отзывы:

Похожие инструкции для ZyWALL USG Series

Бренды по названию

Популярные бренды