ZyXEL Communications ZyWALL USG Series Скачать руководство пользователя страница 122

Страница: 122 / 426

Chapter 15 Route

ZyWALL / USG (ZLD) CLI Reference Guide

122

[no] schedule

schedule_object

Sets the schedule. The

command removes the schedule setting to

the default (

none

means any time.

[no] service {

service_name

|any}

Sets the IP protocol. The

command resets service settings to the

default (

any

means all services.

[no] snat {outgoing-interface|pool

{

address_object

}}

Sets the source IP address of the matched packets that use SNAT. The

command removes source NAT settings from the rule.

[no] source {

address_object

|any}

Sets the source IP address that the matched packets must have. The

command resets the source IP address to the default (

any

means all IP addresses.

[no] srcport {

profile_name

|any}

Sets the source port that the matched packets must have. The

command resets the source port to the default (

any

means all

ports.

[no] sslvpn

tunnel_name

Sets the incoming interface to an SSL VPN tunnel. The

command

removes the SSL VPN tunnel through which the incoming packets are
received.

[no] tunnel

tunnel_name

Sets the incoming interface to an IPSec VPN tunnel. The

command

removes the IPSec VPN tunnel through which the incoming packets are
received.

[no] user

user_name

Sets the user name. The

command resets the user name to the

default (

any

means all users.

policy6 {

policy_number

| append

| insert

policy_number

}

Enters the IPv6 policy-route sub-command mode to configure, add or
insert a policy.

[no] deactivate

Disables the specified policy. The

command enables the specified

policy.

[no] description

description

Sets a descriptive name for the IPv6 policy. The

command removes

the name for the policy.

[no] destination {

address6_object

|any}

Sets the destination IPv6 IP address the matched packets must have.
The no command resets the destination IP address to the default
(

any

means all IP addresses.

[no] dscp {any | <0..63>}

Sets a custom DSCP code point (0~63). This is the DSCP value of
incoming packets to which this policy route applies.

any

means all

DSCP value or no DSCP marker.

[no] dscp class {default |

dscp_class

}

Sets a DSCP class. Use

default

to apply this policy route to incoming

packets that are marked with DSCP value 0. Use one of the pre-
defined AF classes (including af11~af13, af21~af23, af31~af33, and
af41~af43) to apply this policy route to incoming packets that are
marked with the DSCP AF class.

The “af” entries stand for Assured Forwarding. The number following
the “af” identifies one of four classes and one of three drop
preferences. See

Assured Forwarding (AF) PHB for DiffServ on page

124

for more details.

dscp_class

can set cs0~cs7 too.

dscp-marking <0..63>

Sets a DSCP value to have the ZyWALL / USG apply that DSCP value to
the route’s outgoing packets.

Table 60

Command Summary: Policy Route (continued)

COMMAND

DESCRIPTION

Содержание ZyWALL USG Series











































































































































































































































































































































































































































Результаты поиска

Содержание ZyWALL USG Series

Отзывы:

Похожие инструкции для ZyWALL USG Series

Бренды по названию

Популярные бренды

ZyXEL Communications ZyWALL USG Series, Справочное руководство

Результаты поиска

Содержание ZyWALL USG Series

Отзывы:

Похожие инструкции для ZyWALL USG Series

Бренды по названию

Популярные бренды