ZyXEL Communications ZyWALL USG Series Скачать руководство пользователя страница 212

Страница: 212 / 426

Chapter 31 Bandwidth Management

ZyWALL / USG (ZLD) CLI Reference Guide

212

[no] outgoing-interface {interface

interface_name

| trunk

group_name

}

Sets the destination interface of the traffic to which this
policy applies.

interface_name

: The name of the interface. This depends

on the ZyWALL / USG model. See

Table 36 on page 85

for

detailed information about the interface name.

group_name

: A descriptive name for the trunk. The name

cannot start with a number. This value is case-sensitive.

The

command resets the outgoing interface to the

default (

any

[no] schedule

schedule_object

Specifies a schedule that defines when the policy applies.

The

command resets the schedule to the default (

none

)

to make the policy always effective.

[no] service service-object {

service_name

any}

Specifies a service or service group to identify the type of
traffic to which this policy applies.

any

: the policy is effective for every service.

The

command resets the service to the default (

any

show

Displays the policy settings.

[no] source

address_object

Sets the source IP address or address group for whom this
policy applies.

The

command resets the source IP address(es) to the

default (

any

means all IP addresses.

[no] type {per-user | shared | per-ip-source}

Sets the type of bandwidth management.

per-user

: to allow every user that matches this policy to

use up to the bandwidth configured in this policy.

shared

: to have users that match this policy to share the

bandwidth configured in this policy.

per-ip-source

: tset the maximum bandwidth for traffic

from an individual source IP address.

The

command resets the bandwidth management type

to the default (

shared

[no] user

user_name

Sets a user name or user group to which to apply the
policy.

The

command resets the user name to the default

(

any

means all users.

priority-code <0..7>

Priority code is applied to outgoing traffic. The BWM policy
priority code setting overwrites the VLAN priority code
setting.

Sets the priority code for the specfied VLAN from 0 (lowest,
background traffic) to 7 (highest, network control traffic).
This is the priority code for packets in the specfied VLAN
that don’t match the BWM rule.

vlan-priority-code <0..7>

Sets the priority code for matching outgoing traffic in the
specfied VLAN.

Table 116

bwm Sub-commands (continued)

COMMAND

DESCRIPTION

Содержание ZyWALL USG Series











































































































































































































































































































































































































































Результаты поиска

Содержание ZyWALL USG Series

Отзывы:

Похожие инструкции для ZyWALL USG Series

Бренды по названию

Популярные бренды

ZyXEL Communications ZyWALL USG Series, Справочное руководство

Результаты поиска

Содержание ZyWALL USG Series

Отзывы:

Похожие инструкции для ZyWALL USG Series

Бренды по названию

Популярные бренды