manualshive.com logo in svg

ZyXEL Communications ZyWALL USG Series, Справочное руководство

Серия сетевых защитных межсетевых экранов ZyXEL Communications ZyWALL USG обеспечивает высокую безопасность сети. Загрузите бесплатное Руководство по эксплуатации с нашего сайта, чтобы узнать все особенности устройства. Возможность скачать его с manualshive.com.

Поделиться
Скачать
background image

 Chapter 13 Interfaces

ZyWALL / USG (ZLD) CLI Reference Guide

89

nd ra hop-limit

Removes the maximum number of hops setting for router 
advertisements and all IPv6 packets originating from the interface.

nd ra min-rtr-interval

Removes the minimum IPv6 router advertisement transmission interval 
setting.

nd ra max-rtr-interval

Removes the maximum IPv6 router advertisement transmission interval 
setting.

nd ra reachable-time

Sets the amount of time a remote IPv6 node is considered reachable 
after a reachability confirmation event to the default.

nd ra default-lifetime

Sets the router lifetime value included in all IPv6 router advertisements 
the interface sends to the default. The router lifetime value should be 
equal to or greater than the router advertisement interval. 

nd ra retrans-timer

Sets the IPv6 router advertisement retransmission interval to the 
default.

ipv6 address 

dhcp6_profile 

dhcp6_suffix_128

Removes the specified setting for having the ZyWALL / USG obtain an 
IPv6 prefix from the ISP or a connected uplink router for an internal 
network. 

nd ra prefix-advertisement 

DHCP6_PROFILE DHCP6_SUFFIX_64

Removes the specified setting for using a delegated prefix as the 
beginning part of the network prefix. 

dhcp6

Sets the interface’s DHCPv6 setting back to the default.

dhcp6 address-request

Has the ZyWALL / USG not get this interface’s IPv6 address from the 
DHCPv6 server. 

dhcp6 rapid-commit

Has the ZyWALL / USG use the full four-step DHCPv6 message 
exchange process.

Note: Make sure you also disable this option in the DHCPv6 clients.

dhcp6-lease-object 

dhcp6_profile

Removes the specified profile of DHCPv6 lease settings to offer to 
DHCPv6 clients.

dhcp6-request-object 

dhcp6_profile

Removes the specified profile of DHCPv6 request settings that 
determine what additional information to get from the DHCPv6 server.

interface reset 

{

interface_name

|

virtual_interface_name

|al

l}

Resets the interface statistics TxPkts (transmitted packets) and RxPkts 
(received packets) counts to 0. You can use the 

show interface 

summary all status

 command to see the interface statistics.

interface send statistics interval 

<15..3600>

Sets how often the ZyWALL / USG sends interface statistics to external 
servers. For example, syslog server and Vantage Report server.

show interface-name

Displays all PPP and Ethernet interface system name and user-defined 
name mappings.

interface-name {

ppp_interface

 | 

ethernet_interface

} 

user_defined_name

Specifies a name for a PPP or an Ethernet interface. It can use 
alphanumeric characters, hyphens, and underscores, and it can be up to 
11 characters long. 

ppp_interface

 | 

ethernet_interface

: This must be the system name 

of a PPP or an Ethernet interface. Use the 

show interface-name

 

command to see the system name of interfaces.

user_defined_name

: 

•

This name cannot be one of the follows: 
"ethernet", "ppp", "vlan", "bridge", "virtual", "wlan", "cellular", 

"aux", "tunnel", "status", "summary", "all"

•

This name cannot begin with one of the follows either: 
"ge", "ppp", "vlan", "wlan-", "br", "cellular", "aux", "tunnel".

interface-rename 

old_user_defined_name 

new_user_defined_name

Modifies the user-defined name of a PPP or an Ethernet interface.

Table 37   

interface

 General Commands: Basic Properties and IP Address Assignment (continued)

COMMAND

DESCRIPTION

Содержание ZyWALL USG Series











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZyWALL USG Series

H3C SecPath Series Command Reference Manual preview
SecPath Series
Бренд: H3C Страницы: 27
H3C SecPath Series Command Manual preview
SecPath Series
Бренд: H3C Страницы: 42
H3C SecPath F5020 Installation Manual preview
SecPath F5020
Бренд: H3C Страницы: 64
H3C H3C SecPath F1800-A Installation Manual preview
H3C SecPath F1800-A
Бренд: H3C Страницы: 13
Ruijie Networks RG-WALL1600-S3600 Hardware Installation And Reference Manual preview
RG-WALL1600-S3600
Бренд: Ruijie Networks Страницы: 28
H3C H3C SECPATH F100-A Installation Manual preview
H3C SECPATH F100-A
Бренд: H3C Страницы: 59
ZyXEL Communications ZyXEL ZyWALL 5 User Manual preview
ZyXEL ZyWALL 5
Бренд: ZyXEL Communications Страницы: 668
Fortinet FortiGate 1U Quick Start Manual preview
FortiGate 1U
Бренд: Fortinet Страницы: 272
PaloAlto Networks ION 3000 Hardware Reference Manual preview
ION 3000
Бренд: PaloAlto Networks Страницы: 26
Fortinet FortiGate FortiGate-300A Administration Manual preview
FortiGate FortiGate-300A
Бренд: Fortinet Страницы: 392
Barracuda F800 CCC Manual preview
F800 CCC
Бренд: Barracuda Страницы: 8
Trend Micro TippingPoint TPS 8200TX Installation Instructions Manual preview
TippingPoint TPS 8200TX
Бренд: Trend Micro Страницы: 9
SonicWALL TZ670 Quick Start Manual preview
TZ670
Бренд: SonicWALL Страницы: 2
SonicWALL TZ600 Quick Start Manual preview
TZ600
Бренд: SonicWALL Страницы: 2
Moxa Technologies NPort 6250 Series Quick Installation Manual preview
NPort 6250 Series
Бренд: Moxa Technologies Страницы: 2
Moxa Technologies IEC-G102-BP Series Quick Installation Manual preview
IEC-G102-BP Series
Бренд: Moxa Technologies Страницы: 10
Moxa Technologies IEF-G9010 Series User Manual preview
IEF-G9010 Series
Бренд: Moxa Technologies Страницы: 90

Бренды по названию

Популярные бренды

Загрузить еще бренды