ZyXEL Communications ZyWALL USG Series, Справочное руководство

Страница: 343 / 426

Chapter 53 File Manager
ZyWALL / USG (ZLD) CLI Reference Guide
343
53.4 File Manager Commands Summary
The following table lists the commands that you can use for file management.
Table 211
File Manager Commands Summary
COMMAND DESCRIPTION
apply /conf/ file_name.conf [ignore-
error] [rollback]
Has the ZyWALL / USG use a specific configuration file. You must still use
the
write
command to save your configuration changes to the flash
(“non-volatile” or “long term”) memory.
Use this command without specify both
ignore-error
and
rollback
: this
is not recommended because it would leave the rest of the configuration
blank. If the interfaces were not configured before the first error, the
console port may be the only way to access the device.
Use
ignore-error
without
rollback
: this applies the valid parts of the
configuration file and generates error logs for all of the configuration file’s
errors. This lets the ZyWALL / USG apply most of your configuration and
you can refer to the logs for what to fix.
Use both
ignore-error
and
rollback
: this applies the valid parts of the
configuration file, generates error logs for all of the configuration file’s
errors, and starts the ZyWALL / USG with a fully valid configuration file.
Use
rollback
without
ignore-error
: this gets the ZyWALL / USG
started with a fully valid configuration file as quickly as possible.
You can use the “
apply /conf/system-default.conf
” command to reset
the ZyWALL / USG to go back to its system defaults.
copy {/conf | /idp | /packet_trace | /
script | /tmp} file_name-a.conf {/conf |
/idp | /packet_trace | /script | /tmp}/
file_name-b.conf
Saves a duplicate of a file on the ZyWALL / USG from the source file name
to the target file name.
Specify the directory and file name of the file that you want to copy and
the directory and file name to use for the duplicate. Always copy the file
into the same directory.
copy running-config startup-config
Saves your configuration changes to the flash (“non-volatile” or “long
term”) memory. The ZyWALL / USG immediately uses configuration
changes made via commands, but if you do not use this command or the
write command, the changes will be lost when the ZyWALL / USG
restarts.
copy running-config /conf/ file_name.conf
Saves a duplicate of the configuration file that the ZyWALL / USG is
currently using. You specify the file name to which to copy.
delete {/conf | /idp | /packet_trace | /
script | /tmp}/ file_name
Removes a file. Specify the directory and file name of the file that you
want to delete.
dir {/conf | /idp | /packet_trace | /
script | /tmp}
Displays the list of files saved in the specified directory.
rename {/conf | /idp | /packet_trace | /
script | /tmp}/ old-file_name {/conf | /
idp | /packet_trace | /script | /tmp}/
new-file_name
Changes the name of a file.
Specify the directory and file name of the file that you want to rename.
Then specify the directory again followed by the new file name.
rename /script/ old-file_name /script/
new-file_name
Changes the name of a shell script.
run /script/ file_name.zysh
Has the ZyWALL / USG execute a specific shell script file. You must still
use the
write
command to save your configuration changes to the flash
(“non-volatile” or “long term”) memory.
schedule-run 1 file_name.zysh {daily |
monthly | weekly} time { date | sun | mon
| tue | wed | thu | fri | sat}
Has the ZyWALL / USG execute the specified specific shell script file at the
the specified time. You must still use the
write
command to save your
configuration changes to the flash (“non-volatile” or “long term”)
memory.