ZyXEL Communications XGS1930-38, Руководство пользователя

Страница: 170 / 373

Chapter 19 Port Security
XGS1930 Series User’s Guide
170
Figure 123 Advanced Application > Port Security
The following table describes the labels in this screen.
Table 76 Advanced Application > Port Security
LABEL DESCRIPTION
Port Security
Active Select this option to enable port security on the Switch.
Port This field displays the port number. * means all ports.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this check box to enable the port security feature on this port. The Switch forwards
packets whose MAC address(es) is in the MAC address table on this port. Packets with no
matching MAC address(es) are dropped.
Clear this check box to disable the port security feature. The Switch forwards all packets on this
port.
Address
Learning MAC address learning reduces outgoing broadcast traffic. For MAC address learning to occur
on a port, the port itself must be active with address learning enabled.
Limited Number
of Learned MAC
Address Use this field to limit the number of (dynamic) MAC addresses that may be learned on a port. For
example, if you set this field to "5" on port 2, then only the devices with these five learned MAC
addresses may access port 2 at any one time. A sixth device would have to wait until one of the
five learned MAC addresses aged out. MAC address aging out time can be set in the
Switch
Setup screen. The valid range is from “0” to “16K”. “0” means this feature is disabled.