ZyXEL Communications VMG5313-B10A, Руководство пользователя

Страница: 131 / 398

Chapter 7 Wireless
VMG5313-B10A/-B30A Series User’s Guide
131
• MBSSID should not replace but rather be used in conjunction with 802.1x security.
7.10.7 Preamble Type
Preamble is used to signal that data is coming to the receiver. Short and long refer to the length of
the synchronization field in a packet.
Short preamble increases performance as less time sending preamble means more time for sending
data. All IEEE 802.11 compliant wireless adapters support long preamble, but not all support short
preamble.
Use long preamble if you are unsure what preamble mode other wireless devices on the network
support, and to provide more reliable communications in busy wireless networks.
Use short preamble if you are sure all wireless devices on the network support it, and to provide
more efficient communications.
Use the dynamic setting to automatically use short preamble when all wireless devices on the
network support it, otherwise the VMG uses long preamble.
Note: The wireless devices MUST use the same preamble mode in order to communicate.
7.10.8 Wireless Distribution System (WDS)
The VMG can act as a wireless network bridge and establish WDS (Wireless Distribution System)
links with other APs. You need to know the MAC addresses of the APs you want to link to. Once the
security settings of peer sides match one another, the connection between devices is made.
At the time of writing, WDS security is compatible with other ZyXEL access points only. Refer to
your other access point’s documentation for details.
The following figure illustrates how WDS link works between APs. Notebook computer A is a
wireless client connecting to access point AP 1 . AP 1 has no wired Internet connection, but it can
establish a WDS link with access point AP 2 , which has a wired Internet connection. When AP 1
has a WDS link with AP 2 , the notebook computer can access the Internet through AP 2 .
Figure 43
WDS Link Example
7.10.9 WiFi Protected Setup (WPS)
Your VMG supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless
network. WPS is an industry standard specification, defined by the WiFi Alliance.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Each WPS connection works between two devices. Both
devices must support WPS (check each device’s documentation to make sure).
WDS
AP 2 AP 1
A