![background image](http://html.mh-extra.com/html/zyxel-communications/vmg5313-b10a/vmg5313-b10a_user-manual_944375087.webp)
Chapter 6 Broadband
VMG5313-B10A/-B30A Series User’s Guide
87
Service
Category
Select
UBR Without PCR
or
UBR With PCR
for applications that are non-time sensitive,
such as e-mail.
Select
CBR
(Continuous Bit Rate) to specify fixed (always-on) bandwidth for voice or data
traffic.
Select
Non Realtime VBR
(non real-time Variable Bit Rate) for connections that do not
require closely controlled delay and delay variation.
Select
Realtime VBR
(real-time Variable Bit Rate) for applications with bursty connections
that require closely controlled delay and delay variation.
PPP Information (This is available only when you select
PPPoE
or
PPPoA
in the
Mode
field.)
PPP User Name Enter the user name exactly as your ISP assigned. If assigned a name in the form
user@domain
where domain identifies a service name, then enter both components exactly
as given.
PPP Password
Enter the password associated with the user name above. Select
password unmask
to
show your entered password in plain text.
PPP Trigger
Type
Select when to have the VMG establish the PPP connection.
Auto Connect
- select this to not let the connection time out.
Connect on Demand
- select this to automatically bring up the connection when the
Device receives packets destined for the Internet.
Manual
- select this if you want to
manually trigger the connection up.
Idle Timeout
This value specifies the time in minutes that elapses before the router automatically
disconnects from the PPPoE server.
This field is not configurable if you select
Auto Connect
in the
PPP Trigger Type
field.
PPPoE
Passthrough
This field is available when you select
PPPoE
encapsulation.
In addition to the VMG’s built-in PPPoE client, you can enable PPPoE pass through to allow up
to ten hosts on the LAN to use PPPoE client software on their computers to connect to the
ISP via the VMG. Each host can have a separate account and a public WAN IP address.
PPPoE pass through is an alternative to NAT for application where NAT is not appropriate.
Disable PPPoE pass through if you do not need to allow hosts on the LAN to use PPPoE client
software on their computers to connect to the ISP.
PPPoE Service
Name
Enter the name of your PPPoE service here.
PPPoE
Passthrough
This field is available when you select
PPPoE
encapsulation.
In addition to the VMG’s built-in PPPoE client, you can enable PPPoE pass through to allow up
to ten hosts on the LAN to use PPPoE client software on their computers to connect to the
ISP via the VMG. Each host can have a separate account and a public WAN IP address.
PPPoE pass through is an alternative to NAT for application where NAT is not appropriate.
Disable PPPoE pass through if you do not need to allow hosts on the LAN to use PPPoE client
software on their computers to connect to the ISP.
IP Address (This is available only when you select
IPv4 Only
or
IPv6/IPv4 DualStack
in the
IPv6/IPv4
Mode
field.)
Obtain an IP
Address
Automatically
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed;
the ISP assigns you a different one each time you connect to the Internet. Select this if you
have a dynamic IP address.
DHCP
option 60/
Vendor ID
This field displays when editing an existing WAN interface. Type the class vender ID you
want the VMG to add in the DHCP Discovery packets that go to the DHCP server.
Table 8
Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode) (continued)
LABEL
DESCRIPTION
Содержание VMG5313-B10A
