ZyXEL Communications Prestige 861H-G1, Руководство пользователя

Страница: 227 / 275

Prestige 861H User’s Guide
IP Policy Routing 29-5
Table 29-2 Menu 25.1.1 IP Routing Policy
FIELD DESCRIPTION
the Prestige if it is on the LAN, otherwise, the gateway must be the IP address of a
remote node. The default gateway is specified as 0.0.0.0.
Type of Service Set the new TOS value of the outgoing packet. Prioritize incoming network traffic by
choosing
No Change , Normal , Min Delay , Max Thruput , Max Reliable or Min Cost .
Precedence Set the new outgoing packet precedence value. Values are 0 to 7 or No Change .
Log Press [SPACE BAR] and then [ENTER] to select Yes to make an entry in the system
log when a policy is executed.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
29.5 Applying an IP Policy
This section shows you where to apply the IP policies after you design them.
29.5.1 Ethernet IP Policies
From Menu 3 — Ethernet Setup , type 2 to go to Menu 3.2 — TCP/IP and DHCP Ethernet
Setup .
You can choose up to four IP policy sets (from 12) by typing their numbers separated by commas,
for example, 2, 4, 7, 9.
Figure 29-4 Menu 3.2 TCP/IP and DHCP Ethernet Setup
Go to menu 11.3 (shown next) and type the number(s) of the IP Routing Policy set(s) as
appropriate. You can cascade up to four policy sets by typing their numbers separated by
commas.
Menu 3.2 - TCP/IP and DHCP Setup
DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 6
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies=
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel: