ZyXEL Communications Prestige 861H-G1, Руководство пользователя

Страница: 204 / 275

Prestige 861H User’s Guide
26-2 Firmware and Configuration File Maintenance
FILE TYPE INTERNAL NAME EXTERNAL NAME DESCRIPTION
Firmware Ras This is the generic name for the ZyNOS firmware
on the Prestige. *.bin
26.2 Backup Configuration
Option 5 from Menu 24 – System Maintenance allows you to backup the current Prestige
configuration to your computer. Backup is highly recommended once your Prestige is functioning
properly. FTP is the preferred methods for backing up your current configuration to your
computer since they are faster. Any serial communications program should work fine; however,
you must use Xmodem protocol to perform the download/upload and you don’t have to rename
the files.
Please note that terms “download” and “upload” are relative to the computer. Download means to
transfer from the Prestige to the computer, while upload means from your computer to the
Prestige.
26.2.1 Backup Configuration
Follow the instructions as shown in the next screen.
Figure 26-1 Telnet in Menu 24.5
26.2.2 Using the FTP Command from the Command Line
1.
Launch the FTP client on your computer.
2.
Enter “open”, followed by a space and the IP address of your Prestige.
3.
Press [ENTER] when prompted for a username.
4.
Enter your password as requested (the default is “1234”).
5.
Enter “bin” to set transfer mode to binary.
Menu 24.5 - System Maintenance - Backup Configuration
To transfer the configuration file to your workstation, follow the
procedure
below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your Prestige. Then type "root" and
SMT password as requested.
3. Locate the 'rom-0' file.
4. Type 'get rom-0' to back up the current Prestige configuration to
your workstation.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on backup using TFTP (note that you must remain
in this menu to back up using TFTP), please see your Prestige manual.