ZyXEL Communications Prestige 861H-G1, Руководство пользователя

Страница: 146 / 275

Prestige 861H User’s Guide
19-4 Remote Node Configuration
19.3 Remote Node Network Layer Options
For the TCP/IP parameters, perform the following steps to edit Menu 11.3 – Remote Node
Network Layer Options as shown next.
1. In menu 11.1, make sure IP is among the protocols in the Route field.
2. Move the cursor to the Edit IP/Bridge field, press [ SPACE BAR ] to select Yes, then press
[
ENTER]
to display Menu 11.3 – Remote Node Network Layer Options.
Menu 11.3 - Remote Node Network Layer Options
IP Options: Bridge Options:
IP Address Assignment = Dynamic Ethernet Addr Timeout(min)= 0
Rem IP Addr = 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= N/A
NAT= SUA Only
Address Mapping Set= N/A
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies=
Enter here to CONFIRM or ESC to CANCEL:
Figure 19-3 Menu 11.3 Remote Node Network Layer Options
The next table explains fields in Menu 11.3
–
Remote Node Network Layer Options .
Table 19-2 Menu 11.3 Remote Node Network Layer Options
FIELD DESCRIPTION EXAMPLE
IP Address
Assignment Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote
node is using a dynamically assigned IP address or Static if it is using a
static (fixed) IP address. You will only be able to configure this in the ISP
node (also the one you configure in menu 4), all other nodes are set to
Static .
Dynamic
Rem IP Addr This is the IP address you entered in the previous menu.
Rem Subnet
Mask Type the subnet mask assigned to the remote node.
My WAN
Addr Some implementations, especially UNIX derivatives, require separate IP
network numbers for the WAN and LAN links and each end to have a unique
address within the WAN network number. In that case, type the IP address
assigned to the WAN port of your Prestige.
NOTE: Refers to local Prestige address, not the remote router address.