ZyXEL Communications Prestige 861H-G1, Руководство пользователя

Страница: 141 / 275

Prestige 861H User’s Guide
Internet Access 18-7
The following table contains instructions on how to configure your Prestige for Internet access.
Table 18-2 Menu 4 Internet Access Setup
FIELD DESCRIPTION EXAMPLE
ISP’s Name Enter the name of your Internet Service Provider. This information is
for identification purposes only. MyIsp
Encapsulation Press [SPACE BAR] to select the method of encapsulation used by
your ISP. Choices are PPPoE , PPPoA , RFC 1483 or ENET ENCAP .
ENET ENCAP
Multiplexing The Prestige supports LLC multiplexing method. LLC-based
VPI # Enter the Virtual Path Identifier (VPI) assigned to you. 8
VCI # Enter the Virtual Channel Identifier (VCI) assigned to you. 32
Service Name Type a Service Name for PPPoE encapsulation only. Enter the login
name that your ISP gives you.
My Login Configure the My Login and My Password fields for PPPoA and
PPPoE encapsulation only. Enter the login name that your ISP gives
you. If you are using PPPoE
encapsulation , then this field must be of
the form user@domain where domain identifies your PPPoE service
name.
user@domain
My Password Enter the password associated with the login name above. ********
NAT Press [SPACE BAR] to select None , SUA Only or Full Feature .
Please see the NAT Chapter for more details on the SUA (Single
User Account) feature.
SUA Only
Address
Mapping Set
Type the numbers of mapping sets (1-8) to use with NAT. See the
NAT chapter for details.
N/A
IP Address
Assignment Press [SPACE BAR] to select Static or Dynamic address
assignment.
Dynamic
IP Address Enter the IP address supplied by your ISP if applicable. N/A
ENET ENCAP
Gateway Enter the gateway IP address supplied by your ISP when you are
using
ENET ENCAP encapsulation.
N/A
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
If all your settings are correct your Prestige should connect automatically to the Internet. If the
connection fails, note the error message that you receive on the screen and take the appropriate
troubleshooting steps.