ZyXEL Communications Prestige 861H-G1, Руководство пользователя

Страница: 161 / 275

Prestige 861H User’s Guide
Network Address Translation (NAT) 22-1
Chapter 22
Network Address Translation (NAT)
This chapter discusses how to configure NAT on the Prestige.
22.1 Using NAT
You must create a filter rule in addition to setting up SUA/NAT, to allow traffic from the WAN
to be forwarded through the Prestige.
22.2 Applying NAT
You apply NAT via menus 4 or 11.3 as displayed next. The next figure shows you how to apply
NAT for Internet access in menu 4. Enter 4 from the main menu to go to
Menu 4 - Internet
Access Setup .
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 8
VCI #= 35
Service Name= N/A
My Login= N/A
My Password= N/A
NAT= SUA Only
Address Mapping Set= N/A
IP Address Assignment= Dynamic
IP Address= 0.0.0.0
ENET ENCAP Gateway= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Figure 22-1 Menu 4 Applying NAT for Internet Access
The following figure shows how you apply NAT to the remote node in menu 11.1.
1. Enter 11 from the main menu.
2. When menu 11 appears, as shown in the following figure, type the number of the remote
node that you want to configure.
3. Move the cursor to the Edit IP/Bridge field, press
[SPACE BAR]
to select
Yes
and then
press
[ENTER]
to bring up Menu 11.3 - Remote Node Network Layer Options.