ZyXEL Communications Prestige 128IMH, Руководство пользователя, Страница: 79 / 142

Prestige 128IMH User’s Guide ZyXEL
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
Page 9-5
the Prestige is configured to receive incoming calls, you can configure the default dial-in
parameters in menu 13 (see Chapter 1).
1. Route - Make sure IPX is among the protocols in the Route field.
2. Edit IP/IPX/Bridge - Press the space bar to change it to
Yes
and press
ENTER
to go
to the network layer options menu.
The table below describes the pertinent fields.
Figure 9-1 Menu 11.1 – Remote Node Network Layer Options
Field Description
Dial-On-Query This field is necessary for the Prestige on the client side LAN. When set
to Yes, query packets coming from the LAN will cause the Prestige to
make a call to that remote node. If it is set to No, the queries will not
cause the Prestige to make the outgoing call.
Rem LAN Net # Enter the internal network number of the NetWare server on the remote
side LAN. The Prestige creates a route to access this server.
My WAN Net # Enter the WAN network number of the device that you are connecting
to. Leave this field as 00000000, for the Prestige to negotiate it
automatically between the two devices.
Hop Count This field indicates the number of intermediate networks that must be
passed to reach the remote node. The default is one 1.
Menu 11.3 - Remote Node Network Layer Options
IP Options: IPX Options:
Rem IP Addr: 0.0.0.0 Dial-On-Query= N/A
Rem Subnet Mask= 0.0.0.0 Rem LAN Net #= N/A
My WAN Addr= 0.0.0.0 My WAN Net #= N/A
Single User Account= Yes Hop Count= N/A
Tick Count= N/A
Metric= 2 W/D Spoofing(min)= N/A
Private= No SAP/RIP Timeout(min)= N/A
RIP Direction= Both
Version= RIP-2B Bridge Options:
Dial-On-Broadcast= N/A
Ethernet Addr Timeout(min)=N/A
Enter here to CONFIRM or ESC to CANCEL: