ZyXEL Communications Prestige 128IMH, Руководство пользователя, Страница: 122 / 142

ZyXEL Prestige 128IMH User’s Guide
Page 16-12
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
16.8. Command Interpreter Mode
This option allows you to enter the command interpreter mode. This mode allows you to
diagnose, test and configure your Prestige using a specified set of commands. A list of valid
commands can be found by typing
help or ? at the command prompt. For more detailed
information, please check ZyXEL Web site or send email to ZyXEL Support Group.
Figure 16-1 Command Mode
16.9. Call Control
The Prestige provides two Call Control Management functions for the remote node and
remote dial-in user. They are Budget Management and Blacklist. The Budget
Management sets a limit on the outgoing calls. It limits the total outgoing call time of the
Prestige over a period of time for each remote node & remote dial-in user (callback only). If
the total outgoing call time exceeds the set limit, future outgoing calls will not be made and
the current call will be dropped.
The Blacklist function prevents the Prestige from re-dialing to an ‘unreachable’ telephone
number. It is a list of telephone numbers, to which the Prestige will not make an outgoing
call. If the Prestige dials a telephone number a certain number of times (configurable in
menu 24.9.1) and fails, then the telephone number will be put onto the blacklist. You must
enable the number manually for the Prestige to dial it again.
16.9.1. Call Control Parameters
Enter Menu Selection Number: 8
Copyright (c) 1994 - 1998 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys exit device ether
isdn radius ip ppp
bridge ipx
Menu 24.9.1 - Call Control Parameters
Dialer Timeout:
Digital Call(sec)= 30
Retry Counter= 0
Retry Interval(sec)= N/A