ZyXEL Communications Prestige 128IMH, Руководство пользователя, Страница: 63 / 142

Prestige 128IMH User’s Guide ZyXEL
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
Page 7-7
Address Supplied By: IP Pool field
IP Pool field The IP pool contains contiguous IP addresses and this field
specifies the first one in the pool.
IP Count (1,2) In this field, enter the number (1 or 2) of the addresses in the
IP Pool. For example, if the starting address is 192.168.1.65
and the count is 2, then the pool will have 192.68.1.65 and
192.68.1.66.
Dial-In IPX Net. Num.
Supplied By: IPX Pool This field tells the Prestige to provide the remote host with an
IPX network number from the pool. Otherwise, the Prestige
generates a random IPX network number. The default is No.
IPX Start Net. Num.
This field is active only if you selected Yes in the Dial-In IPX
Net. Num. Supplied By: IPX Pool field. The IPX pool
contains contiguous IPX network numbers and this field
specifies the first one in the pool.
IPX Count (2,16) In this field, enter the number (2 - 16) of network numbers in
the IPX Pool. For example, if the starting number is 12345678
and the count is 2, then the pool will have 12345678 and
12345679
Session Options: Edit Filter
Sets - Input Filter Sets and
Output Filter Sets Select the filter set(s) to filter the incoming and outgoing
traffic between your Prestige and the remote dial-in user.
Session Options: Idle
Timeout This value is the number of idle seconds that elapses before
the dial-in user is automatically disconnected. Idle Timeout is
the period of time when there is no data traffic from the
Prestige. This field is only used if the Recv. Authen is set to
None and the call is not mapped to any remote node or
remote dial-in user or the Prestige calls back to the remote
dial-in user.
Table 7-1 Default Dial-in Setup Fields
.
Once you have completed filling in Menu 13 - Default Dial-in Setup, press
ENTER
at the
message: ‘Press ENTER to Confirm ...’ to save your configuration or press
ESC
at any
time to cancel.