ZyXEL Communications Prestige 128IMH, Руководство пользователя, Страница: 62 / 142

ZyXEL Prestige 128IMH User’s Guide
Page 7-6
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
Field Description
Telco Options: CLID
Authen.
There are three choices for this field:None, Required, or
Preferred .
PPP Options: Recv.
Authen.
Choices for this field are CHAP/PAP, CHAP , PAP, None.
PPP Options: Mutual
Authen.
If the remote node that is dialing in implements mutual
authentication, set this field to Yes.
PAP Login
This field is only enabled if the Mutual Authen.field is set to
Yes. Enter in the login name to be used to respond to the far
end’ s PAP authentication request. This field does not apply to
CHAP authentication.
PAP Password
This field is only enabled if the Mutual Authen.field is set to
Yes. Enter in the PAP password to be used to respond to the
far end’ s authentication request. This field does not apply to
CHAP authentication.
Multiple Link Options: Max
Trans Rate Enter the maximum data transfer rate between your Prestige
and the remote dial-in user. 64 - At most, one B channel is
used., 128 - A maximum of two channels can be used.. When
the Prestige calls back to the remote dial-in user, the
maximum data transfer rate is always 64
Callback Budget
Management: Allocated
Budget (min) This field sets a ‘ budget’ callback time for all the remote dial-
in users. The default for this field is 0 for no budget control
Callback Budget
Management: Period (hr) This field sets the time interval to reset the above callback
budget control.
Dial-In IP Address Supplied
By: Dial-in User
If set to Yes, it tells the Prestige to allow a remote host to
specify its own IP address. If set to No, the remote host must
use the IP address assigned by the Prestige from the IP pool
configured below. The default is Yes.
Dial-In IP Address Supplied
By: IP Pool This field tells the Prestige to provide the remote host with an
IP address from the pool. This field is required if Dial-In IP
Address Supplied By: Dial-in User is set to No. You can
configure this field even if Dial-in User is set to Yes, in which
case the Prestige accepts the IP address if the remote peer
specifies one; otherwise, an IP address is assigned from the
pool. The default is No.
IP Pool: IP Start Addr
This field is active only if you selected Yes in the Dial-In IP