Chapter 15 Backup/Restore
PM7300-T0 User’s Guide
50
Click
Backup
to save the PM7300-T0’s current configuration to your computer.
Restore Configuration
Restore Configuration allows you to upload a new or previously saved configuration file from your
computer to your PM7300-T0.
Do not turn off the PM7300-T0 while configuration file upload is in
progress.
After the PM7300-T0 configuration has been restored successfully, the login screen appears. Login again
to restart the PM7300-T0.
The PM7300-T0 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 35
Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your computer
to be in the same subnet as that of the default device IP address (192.168.0.1).
If the upload was not successful, the following screen will appear. Click
OK
to go back to the
Configuration
screen. Reset to Factory Defaults.
Click the
Reset
button to clear all user-entered configuration information and return the PM7300-T0 to its
factory defaults. The following warning screen appears.
You can also press the
RESET
button on the rear panel to reset the factory defaults of your PM7300-T0.
Refer to
for more information on the
RESET
button.
15.3 The Reboot Screen
System restart allows you to reboot the PM7300-T0 remotely without turning the power off. You may
need to do this if the PM7300-T0 hangs, for example.
Click
Maintenance > Reboot
. Click
Reboot
to have the PM7300-T0 reboot. This does not affect the
PM7300-T0's configuration.
Table 26 Restore Configuration
LABEL
DESCRIPTION
File Path
Type in the location of the file you want to upload in this field or click
Browse
to find it.
Browse
Click this to find the file you want to upload. Remember that you must decompress compressed
(.ZIP) files before you can upload them.
Upload
Click this to begin the upload process.
Reset
Click this to reset your
PM7300-T0
settings back to the factory default.
