PES-1014 User’s Guide
Forwarding Database
8-1
Chapter 8
Forwarding DB (Database)
8.1 Introduction
The switch will check the forwarding database before sending data packets to make sure all of the packets are sent
correctly. The forwarding database (address table, look up table, forwarding table) can be built by dynamic
(automatic) address learning or by static (manual) entry. When using dynamic address learning, it is possible to age
out certain entries if aging control is enabled and the aging time expires; but it is also keeps updating for new
packets received with different SAs.
The switch does not age out or update static entries. The only way to change the static entries is through manual
editing in the
Edit Static Entry
screen.
Moving the cursor over the
Forwarding DB
link brings up the following submenus.
Enabling the
Security
setting for a port in the
Port Configuration
screen (
5.3
) automatically disables the aging
out timer for that port and changes it to a static entry in the forwarding database.
8.2
Current Forwarding DB Status
Move the cursor over the
Forwarding DB
link and click
Current Status
to display the
Current Forwarding DB
Status
screen shown next. This screen shows the current forwarding database status. A total of 1K MAC address
entries can be stored in the device.
Figure 8-1 Forwarding Database Bar
