PES-1014 User’s Guide
3-6
Getting Started
3.5.4 Saving
Changes
If you do not save your configuration changes to flash memory, all of your changes will be lost when the switch is
restarted. Use the following steps to save changes when you are done configuring a screen.
Step 1.
Click
Apply
(this saves the settings to working memory).
Step 2.
Move your cursor over
System
in the
Information Panel
and click
Save Changes
.
Step 3.
Click
Save
in the
Save Changes
screen (saves the settings to flash memory).
•
Settings in the Networking screen will not take effect until the switch is restarted. Do the following to restart:
Step 4.
Move your cursor over
Reset
in the
Information Panel
and click
Reboot Device
.
Step 5.
Click
Reboot and Saving
.
3.5.5 Reset
Click
Reset
to go to the screen’s previous configuration.
